Menu


Account

Cart

Vail Wood Fireplace Mantel Shelf

$199.99 - $569.99


Select Length x Height*

Select Finish/Color*

Driftwood

Rustic Provincial

Unfinished

 

Interested in professional installation?

Learn More
Overall Length D
Select
Lookout Width LW
Select
Shelf Height H
Select
Shelf Depth F
8"
Lookout Depth LD
8"

If you require a unique height or depth we can help!

To order a custom shelf you will need to know your measurements. For instructions on how to measure and order your custom shelf view the Custom Shelf Dimension Worksheet and fill in the appropriate measurements, or call us at 888.493.8898.

In many cases we can customize the Overall Length "D", Lookout Width "LW", Shelf Depth "F", and Lookout Depth "LD". Submit an online form or call 888.493.8898.

  • Customize mantel shelf to a specific length or depth
  • Variations in grain, knots and distressing from natural rough-sawn pine
  • Mantel shelf installation requires basic tools and skills
  • Includes mounting board, wood screws and step-by-step instructions
  • 48", 60", 72" & Custom Lengths. Each length available in 4" & 6" Heights.
Rustic, distressed, imperfections are a dominant trend when it comes to "shabby chic" & "nature inspired" home décor. The Vail wood mantel shelf perfectly embodies this trend and creates a truly stunning, natural beauty that will breathe new life into your fireplace.

The Vail is available in standard lengths (48", 60" and 72") & heights (4" and 6") or customized sizes to fit specific dimensions. If you need a standard 48", 60" or 72" wood mantel shelf simply choose a finish.
Professional Installation

Traditional Wood Mantel Shelf Installation Instructions

Follow these 3 easy steps and you will be ready to enjoy your new shelf. You will need the following tools and materials to build your mantel shelf:

  • Hammer
  • Tape Measure
  • ¾" x 2" Mounting Board (1x Included)
  • Drill
  • Pencil
  • #8 Penny Finish Nails

Step 1

Place the shelf on the wall above your fireplace or on the wall at the desired height. Level the shelf and draw a line on the wall at the top of the shelf. Remove the shelf and measure down 2-3/4" from the line and draw a second line on the wall parallel to the first line. See Mantel Plan Fig. 1.

Height of shelf varies. Normal height range from 50 to 55 inches above the floor.

Note: Some shelf designs require the use of a square mounting board as opposed to angled. In this case, measure down from "wall mark" 3/4" to draw a second line. If you have a Commodore or Harford shelf, you should measure down from the wall line 3.5" as opposed to 2.75" to make your second wall line mark.

Step 2

The shelf mounting bracket is a long, narrow wood strip with the top lengthwise edge angled down and away from the outside edge. For some shelves such as the Bedford, Concorde, Monroe and Vail, the mounting bracket is square, not angled. See Mantel Plan Fig. 2. Line up the bottom of the mounting bracket with the line and attach the mounting bracket to the wall in this position. Make sure mounting bracket is level. If you are mounting the bracket on a standard drywall over stud construction, make sure you screw the mounting bracket into the wood studs (2x4's) for strength. When attaching the shelf to a brick surface you must use a masonry lag bolt. Drill three holes in the mortar joints of the brick in the desired position. Insert lag and attach mounting bracket with a bolt. Make sure the mounting bracket is secure to the wall as shown in FIG. 2.

Make sure pointed edge of bracket is away from the wall.

Line up bottom of mounting bracket with bottom line on wall. Make sure bracket is level then screw to wall.

Step 3

Install shelf over mounting bracket and slide down until shelf is tight against the wall. For shelves with a square mounting bracket, push the shelf tight against the wall, with the square mounting bracket on the inside of the shelf cavity, then push down firmly on the shelf to insure that the bottom of your shelf is resting on top of the mounting bracket. When the shelf is in position, nail down through the top of the shelf into the mounting bracket, using #8 penny finish nails. You may wish to pre-drill pilot holes before nailing. You may also wish to toenail through the top of the shelf into the wall to insure a tight fit. Make sure the shelf is level before nailing. See Mantel Plans Fig. 3 and FIG. 4.

Note: Due to limited height inside the Bedford, Concode, Monroe and Vail shelves, some mounting brackets are straight edged, with no beveled bracket attached inside the shelf. There are no beveled edges to line up on these shelves.

Note: The edge of the shelf against the wall may not be tight against the wall across the whole length of the shelf. The wall may not be uniform and flat. If not, use caulk to fill gap before painting.

This item is eligible for FREE SHIPPING (Regular Delivery) in the contiguous U.S. (If your destination is different please contact us at 1.888.493.8898 or info@mantelsdirect.com)

Regular, FREE delivery

8am-7pm M-Th, 8am-5pm F, 10am-3pm Sat CST

FAQ's

Can I install the mantel or shelf myself?

Yes, you will need just a few basic tools and materials. Instructions are provided in the packaging and are also available on this site under the Easy Installation link.

What is free curbside delivery?

Each product on our website ships for free! We offer free shipping with curbside delivery to destinations in contiguous United States. Canadian shipping is available and your specific location can be quoted. Select items may require an upgrade to "White Glove" delivery in order to ensure delivery without damage.

When will my mantel or shelf arrive?

Your new mantel or shelf should arrive within 2-4 weeks of your order. Orders that require pre-finishing can take 3-4 weeks. Special arrangements can sometimes be made to expedite orders.

Does MantelsDirect.com offer wood types other than the ones shown?

Yes, we are happy to quote any of the mantels or shelves shown in other wood types. Contact us, with your special request.

Can I buy online with confidence?

Absolutely. MantelsDirect.com maintains the highest level of transaction security and is certified for SSL encryption. You can be certain that your payment information stays private and confidential. Our Satisfaction Guarantee enables you to feel comfortable with your purchase. We stand by our products and will make every effort to make your buying experience a positive one.