Emerson Marble Fireplace Mantel

For custom finishes, contact an expert for pricing (888.493.8898)

$25 Desposit

Charcoal

$25 Desposit

Danby

$25 Desposit

Nero

$25 Desposit

Sable

$25 Desposit

White Limestone

Professional Installation

You will need the following tools and materials:

• Power Drill
• Caulk Gun
• Tape Measure
• Level
• Wood Screws (8)
• 2 x 4 x 6'
• Construction Adhesive
• Acrylic Caulk

Step 1 - Mark the center of the firebox and the wall.

Step 2 - Measure the width of the hearth and mark the center.

Dry fit and mark for placement. Apply construction adhesive to the back of the hearth. Set the hearth stone in place and align the center marks.

Step 3 - Locate the riser piece (if using) and dry fit it on top of the hearth.

It may need to be cut to the proper size to cover the space between the hearth and the underside of the firebox if you did not order a custom sized mantel.

Step 4 - Cut one 2x4 wood stud into six pieces, each piece should be no longer than 6" long.

Step 5 - Use construction adhesive to secure one piece of wood into the back of the fireplace leg, near the top of the leg.

Step 6 - Measure the underside of the mantel shelf to determine the width from outside leg to outside leg.

Center this dimension on the firebox and mark each side as a guide for the outside of each leg.

Step 7 - Measure to the top of the piece of wood you secured to the back of the mantel leg.

Measure from the top of the hearth vertically up the wall on each side and mark 1.5" away from the line marking the outside of the mantel leg. Take two of the smaller wood lengths you cut earlier and screw them into the wall, securing firmly. These pieces will need to match up with the pieces at the back of the mantel leg.

Step 8 - Dry fit the two facing legs on the inside of each installed mantel leg to assure a good fit.

Remove, apply construction adhesive to the back of each leg and secure to the wall.

Step 9 - Dry fit the facing header on top of each installed facing leg to assure a good fit.

Remove, apply construction adhesive to the back of the header and secure to the wall.

Step 10 - Take two pieces of the wood you cut earlier and secure each to connect the wood blocks on the back of the mantel leg and the wall.

Step 11 - Locate the mantel breast plate and dry fit to confirm fit.

Apply construction adhesive to the top edge of the mantel leg and secure it.

Step 12 - Dry fit mantel shelf on top of mantel breast plate.

Apply construction adhesive to the top of the breast plate and set mantel shelf on top.

This item is eligible for FREE SHIPPING (Regular Delivery) in the contiguous U.S. (If your destination is different please contact us at 1.888.493.8898 or [email protected])

Regular, FREE delivery

Free Shipping

We offer free shipping with curbside delivery to destinations in the lower 48 US states on every item we sell. All other locations will be quoted. You will be advised at the time of your order if a "White Glove" delivery is required.

Delivery

As defined by the trucking industry, Home Delivery means "curbside delivery" in a residential area. You may need assistance to move the package indoors or you might unbox the shipment and carry each piece inside individually. While some drivers may assist in getting a shipment into a garage or carport, it is not a standard level of service with "curbside delivery."

"White Glove" Delivery Upgrade

• "Threshold" delivery - Freight carrier will carry items to a ground-floor threshold such a main entry or garage (no stairs) and less than 200 lbs.
• "Room of Choice" or "White Glove"" delivery - A special delivery service will bring your items to the room you specify, including up to 10 steps. No unpacking, debris removal, assembly or setup. All deliveries over 200 lbs. will be quoted prior to processing order.
• All upgraded delivery options must be added prior to processing order.
• Interested? Contact one of our mantel specialists at 888.493.8898 to get a quote.

Receiving Your Shipment

We are committed to making sure you are satisfied with our products. Your order is inspected prior to shipment to ensure all items are in excellent condition before they leave our facilities. Although our products are packaged securely to prevent any damage it’s possible that in rare cases, damages may occur during shipment.

Before signing for the shipment inspect the carton. The most important thing to remember about truck freight is that when you sign for the delivery you are legally accepting the product as delivered in good condition. Therefore, it is extremely important that you inspect the product prior to signing the delivery receipt. If there is damage to the carton or the product, please write "CONTENTS DAMAGED" clearly on the delivery receipt that the driver is asking you to sign, then sign. This insures that your damage issue will be easily resolved.

If your package has tears, rips or is otherwise in poor condition, open the package and inspect the contents. You may need one of the following on hand to help open the carton: knife, hammer, pry bar or wire cutters. Should you notice any damage, please note it on the delivery receipt and contact us immediately.

If your package/item is damaged, you can start the damage claim process by completing this form.

NOTE: We cannot be held responsible for the cost of repairs or replacement of damaged items if there is no notation on the Freight Delivery Receipt. Contact us within 24 hours to initiate a damage claim.

Cast Stone Fireplace Mantels

• Select Standard Size Cast Stone Fireplace Mantels generally ship within 5 business days. Custom Cast Stone Fireplace Mantels generally ship in 2 ½ to 4 weeks. Shortly after placing your order, you will receive an email with an estimated ship date.
• For all custom size orders, confirmation of your specifications via email is required. After we receive your order, an e-mail with specific dimensions of the mantel or shelf will be sent. We require an approval response to this email before releasing your order for production.
• Transit time varies between 2 and 7 days depending upon your location in the US or Canada. You will receive an email at time of shipment with tracking information.
• These mantels ship via freight carrier. While most mantels ship free of charge (curbside). Cast Stone Fireplace Mantels typically arrive in wooden crates. You may need one of the following on hand to help open the carton: knife, hammer, pry bar or wire cutters.
• Published special delivery fees do not apply to Cast Stone Mantel deliveries. Due to the weight of this product, all special delivery options must be quoted prior to processing your order.
• Please check the cartons when they are delivered. Should your item be damaged, carefully document it on the delivery receipt and contact us immediately.

Important Notes Regarding Item Shipment

• Please contact us with any questions regarding shipment of your item
• Please check the cartons when they are delivered. Should your item be damaged, carefully document it on the delivery receipt and contact us immediately.

8am-7pm M-Th, 8am-5pm F, 10am-3pm Sat CST