Mason Fireplace Mantel Shelf

Choose Your Length* - 60"


Choose Your Finish/Color*

Cedar Umber

Classic Gray



Price: $679.99


Interested in professional installation?

Learn More
Overall Length D
Lookout Width LW
Shelf Height H
Shelf Depth F
Lookout Depth LD
  • Non-combustible cast stone beam shelf
  • Not meant for outdoor use in exposed weather
  • Hollow interior
  • Easy installation
  • Made in the USA
Enjoy the natural look of a raw wood beam, but with the durability and quality of cast stone. Molded and pressed with a wood grain textured pattern, these beautiful shelves look just like real wood, but without any of the clearance to combustibles restrictions. You’ll love your choice of our two pre-finished color options of Cedar Umber or Classic Gray. Alternatively, we also offer the shelf unfinished, so you can stain to your own personal taste.

An easy to hang, 48" x 2" "L" shaped mounting bracket is included, making the installation process a cinch. You'll love the finished look this breathtaking shelf will bring to your fireplace.
Professional Installation

Woodstone Thin Cast Stone Installation

Caution: Shelf is heavy. Use proper lifting technique to avoid injury. It is recommended to have three persons to help with installation.

Minimum tools required:

  • Level
  • Drill
  • 3/16" metal drill bit
  • 3/16" masonry drill bit
  • 3/8" masonry drill bit (to be used as a countersink for screw heads in top shelf plate)

Securing Aluminum Mounting Bracket to Wall

First, determine the exact center point from left to right on wall above fireplace (exact center of firebox) for mantel installation. Mark center point on wall. Determine desired height for top of shelf. Dropdown 1 1/8" and mark wall. Also mark center wall point along this line. Mark exact center point of aluminum angled bracket. Match center point on bracket to center point of wall or fireplace. Using aluminum angled mounting bracket and level; draw a straight, level line at the 1 1/8" mark made in step 3. See Fig 1. Locate 3 wall studs. Mark wall stud location by placing mark just above level line created in step 5. Hold mounting bracket back in place on wall line, centered with center wall mark. Mark on bracket the location of wall studs. See Fig. 2 TIP: At location of stud, hammer in a finish nail just far enough to hit wall stud, then remove finish nail. Be certain you are going to hit the wall stud securely at the mark point you are making on bracket.

Remove metal bracket. Place bracket on a suitable, steady surface. Using 3/16" metal drill bit, drill pilot holes through bracket at the marked 3 wall stud locations. Pilot holes should be drilled through the portion of bracket that will be flat against wall. The "L" portion of bracket for holding shelf will be at the top and facing out to you. Put bracket back in place on wall at line. Level it and secure to wall studs using the 3" long screws provided. Pull hard on bracket. Make certain it is firmly secured.

Securing Shelf to Bracket

Determine which surface of shelf you prefer to have as top shelf area and bottom side. This is your discretion. Mark center point of shelf. Then mark points 20" to the right of center and 20" to the left of center, placing the marks 1.25" off backside edge of shelf. Using 3/16" masonry drill bit, drill pilot holes at marked locations. Do not apply too much downward pressure while drilling. Using the 3/8" masonry drill bit, drill out the top portion of pilot holes just enough to countersink screw heads down below shelf surface. Use caution to not drill to deep here. Go only about 1/8" below surface. Using two persons to help lift and hold; lift shelf up into place on bracket. You want to match center portion of shelf with center marked area on wall (and bracket). See Fig 3.

Push shelf firmly against wall. Holding in place (it is recommended to lift the front portion of shelf upwards slightly to be sure shelf is not dropping or tilting downward toward the front) secure shelf to brackets by using the 3 ea. provided self tapping metal screws. IMPORTANT: DO NOT OVER TIGHTEN. See Fig 4. Touch up as needed with provided touch up finish and patch mix. It is recommended not fill in over the top of your screw holes. This will prevent you from having access to the screw heads to remove the shelf if needed. Mix powder grout mix with water using very small amounts of water. The patch/grout mix is for chip areas you might have on edges or surface. Touch up with provided finish. If you have gapping between back of shelf and wall, use a good quality acrylic latex caulk to fill. Paint over with either the provided finish or your wall color. For a final added touch you can brush on a water based, low luster concrete sealer over finish. This will make surface area a little more durable and easier to clean. It will however add a little more sheen to the surface finish.

This item is eligible for FREE SHIPPING (Regular Delivery) in the contiguous U.S. (If your destination is different please contact us at 1.888.493.8898 or

Regular, FREE delivery

Select options above for detailed shipping information.

Free Shipping

We offer free shipping with curbside delivery to destinations in the lower 48 US states on every item we sell. All other locations will be quoted. You will be advised at the time of your order if a "White Glove" delivery is required.


As defined by the trucking industry, Home Delivery means "curbside delivery" in a residential area. You may need assistance to move the package indoors or you might unbox the shipment and carry each piece inside individually. While some drivers may assist in getting a shipment into a garage or carport, it is not a standard level of service with "curbside delivery."

"White Glove" Delivery Upgrade

  • "Threshold" delivery - Freight carrier will carry items to a ground-floor threshold such a main entry or garage (no stairs) and less than 200 lbs.
  • "Room of Choice" or "White Glove"" delivery - A special delivery service will bring your items to the room you specify, including up to 10 steps. No unpacking, debris removal, assembly or setup. All deliveries over 200 lbs. will be quoted prior to processing order.
  • All upgraded delivery options must be added prior to processing order.
  • Interested? Contact one of our mantel specialists at 888.493.8898 to get a quote.

Receiving Your Shipment

We are committed to making sure you are satisfied with our products. Your order is inspected prior to shipment to ensure all items are in excellent condition before they leave our facilities. Although our products are packaged securely to prevent any damage it’s possible that in rare cases, damages may occur during shipment.

Before signing for the shipment inspect the carton. The most important thing to remember about truck freight is that when you sign for the delivery you are legally accepting the product as delivered in good condition. Therefore, it is extremely important that you inspect the product prior to signing the delivery receipt. If there is damage to the carton or the product, please write "CONTENTS DAMAGED" clearly on the delivery receipt that the driver is asking you to sign, then sign. This insures that your damage issue will be easily resolved.

If your package has tears, rips or is otherwise in poor condition, open the package and inspect the contents. You may need one of the following on hand to help open the carton: knife, hammer, pry bar or wire cutters. Should you notice any damage, please note it on the delivery receipt and contact us immediately.

If your package/item is damaged, you can start the damage claim process by completing this form.

NOTE: We cannot be held responsible for the cost of repairs or replacement of damaged items if there is no notation on the Freight Delivery Receipt. Contact us within 24 hours to initiate a damage claim.

Traditional Wood Mantels and Shelves

  • All standard and custom size wood mantels and shelves are made to order and ship in 1-3 weeks. Shortly after placing your order, you will receive an email with an estimated ship date.  For all custom size orders, an additional confirmation is required. After we receive your order, an e-mail with specific dimensions of the mantel or shelf will be sent. We require an approval response to this email before releasing your order for production.
  • All full fireplace mantels ship via freight carrier at no additional charge within the lower 48 US states (all other locations will be quoted), if delivered to a commercial business address or if the item is picked up at your local freight terminal.
  • Transit time varies between 2 and 5 days depending upon your location in the US. Canada delivers may take an additional 2 – 4 days. You will receive an email at time of shipment with tracking information.
  • Most mantel shelves under 84" in length will be shipped via FedEx Ground Service at no additional charge within the lower 48 US states (all other locations will be quoted). While most shelves larger than 84" will be shipped via freight line.
  • Please check the cartons when they are delivered. Should your item be damaged, carefully document it on the delivery receipt and contact us immediately.

Important Notes Regarding Item Shipment

  • Please contact us with any questions regarding shipment of your item
  • Please check the cartons when they are delivered. Should your item be damaged, carefully document it on the delivery receipt and contact us immediately.
  • If you wish to return a standard item (custom or previously installed items are not returnable), please send an email to within 30 days of delivery for a return authorization. The item must be returned in sellable condition in original packaging, freight pre-paid.